The size of male dignity was concerned about the representatives of the strongest sex since antiquity.Confirmation of this is an artificial member who was found, who, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany - a country that is considered a pioneer and leader in the field of pornography.
Today to change the size of the penis is possible in different methods - from the use of special medicines, the use of ointments and creams that perform stretching massages in surgery.However, nozzles for the genital, which can be purchased so much in games for intimacy and do it with your own hands, become popular.
Is it possible to make yourself a member nozzle?
The internet is full of requests "How to make an artificial rooster with your own hands".The increased interest is simply explained: the models presented in the stores are high quality and expensive and those with a low price do not differ in high quality.Do you want to try a sex toy, a dilemma is born: Is it necessary to pay for the goods if there is no confidence in its further use?
After all, it may prove that the girl will not approve the presence of the nozzle or cause discomfort, irritation or pain (the latter is not excluded for men).If you choose a more affordable option, there is a risk of irritation due to a possible allergic reaction to the game or injury to the genitals due to broken or exfoliated parts of the nozzle.
It is also possible when you want to try "here and now" but there is no time to wait for an internet order and there is no way to visit the nearest sex store.In such cases, the question of how to make a vibrator or a member of a member at home is quite relevant.
If you consider the product, it is clear that it is quite difficult to make, but not impossible.The main thing is to have a desire and a little time offer, as well as to buy the necessary materials.It is from the latter that the final quality of the resulting object will depend on.The advantage of a homemade member is that its shape and size will be limited to the author's imagination.
The choice of appropriate material
For nozzles and artificial members produced in industrial conditions, use:
- Cybercro is a material almost similar to a person's real skin.It is soft, thin, practically not distinguished by the live flesh, because when it touches the body, it quickly takes its temperature and holds it throughout the time to stay in the organ.The disadvantage of the material is very sensitive to damage, so it requires careful handling, washing in warm soap, storage in a special case.
- Polyvinyl chloride is a material that is more popular for producing vibrators and sex games.Its advantages: the ability to quickly take the form of the human body, power and combination with lubricants.Washed by PVC with soft cleaners: soap, shower gel or intimate hygiene, does not require special storage conditions.The application is possible with any frequency and intensity.
- Silicone is a medical material used to produce familiar goods in 90% of cases.It is soft, flexible and quite elastic.He is able to quickly take the shape of the body, and after the "work" to return to his original state.Advantage: Hypoallergeny that allows all games to operate with any intensity.Store the nozzles from silicone in a dark place, because under the influence of ultraviolet rays, it is destroyed.The disadvantage - the toys with it require lubrication processing and exclusively in water.
- Rubber is a specialized type of material with increased thermoplastic properties and comfortable to the touch.Suitable for the creation of products that need to be given and maintained.The softness of their material allows them to make them comfortable for both partners and elasticity - to obtain the necessary parameters (length, thickness, ribs, pimples, etc.).The nozzles in a rubber member do not rub and cause allergic reactions.Non -aggressive detergents or special cleaners are used for care.
- Plastic is a dense material to which special mixtures are added for more softness and elasticity.It is used for the manufacture of special shapes nozzles.
The choice of material is the most important stage in the manufacture of Dildo with your own hands, because the final version of the product and its safety for both partners depend on it.Therefore, it is extremely undesirable to save in this case.
Material types
Before making the phallus at home, you need to clarify which of these materials are available to the manufacturer.Some of them are available in free sale in construction stores, others when ordering online.
Thus, for the construction of a home -made of gravity, they are appropriate:
- mass of casting alginic;
- Mass of silicone casting.
- Polyurethane mass bending.
Other options may be offered in the store, but before they get them, you should find out if the material causes allergic reactions and how safe it is for the body.
Stages
How to make a vibrator at home?It will be required:
- Flexible transparent plastic.
- adhesive tape (adhesive tape).
- selected material;
- Food movie.
A square or rectangle is cut from the plastic sheet - depending on the size of the product designed.The length of the leaf is adjusted at will - the more centimeters that man wants to add to himself, the more he is.The width of the leaf depends on the existing penis parameters: in an upright state, it should easily get in and have free space.To make a homemade member to fit in size, it must be:
- Measure it with a centimeter ribbon.
- Add the correct amount of centimeters to the results.
- Cut the desired width.
Error: To wrap the plastic sheet around the penis and cut "by eye" - such a phallus that is done by yourself will be either small or too large.
When ends with dimensions and cutting, the sheet turns with a tube, the limb connector is tightly stable with tape.A circle is cut by the plastic, which closes one of the holes and is also tightly wrapped in.The task is to make the receipt of a tube completely tight.
The second stage of the "How to make a Dildo" process is poured.Therefore, an upright penis is tightly wrapped in adhesion film to exclude the mass contact with the body.If the task is to make a smooth nozzle, you must wrap it carefully, with the exception of all possible irregularities, because the smoothness of the interior of the future nozzle will depend on it.
Then the casting mass is poured into the prepared tube and the penis is reduced there.The average solidification process takes 15 minutes, after which the structure is removed from the penis.Now you can carefully remove the film and release the product from the plastic frame - a home manufactured at home is ready to use.
If the guy wants to give anatomical shape to the game, this can be done using a knife and abrasive materials.It is easy to make various protrusions, ribs, antennas and other "chips" of nozzles.
Risks
Before making a member with your hands made of improvised materials, you must take into account the serious health risks that are inherent at home -creating sex toys:
- The stamps, sharp or poorly processed edges, angles, protrusions and other defects in a game made from home are able to cause genital injuries to both partners.
- Incorrectly calculated size threatens the loss of the nozzle in the intimacy process.A more serious choice - can stick to a woman's body.
- If the calculations were carried out in a state of incomplete erection or lost at the time of mass solidification, there is a risk that it will not work to remove the nozzle without medical care.
- Violation of waterproofing when wrapping a member with a film can cause masses in the urethra, which will cause an inflammatory process or urethral obstruction.
- Holding a member of a full erection for 15 minutes is a difficult task for the solution of which men take drugs with phosphodrase inhibitors with serious side effects for internal organs.
Having evaluated and weighing all the potential dangers, they are suitable for independent production of vibrators and nozzles responsible and carefully and all stages are carefully and accurately.
What to make an artificial phallus from
It is easier to make a phallicometry directly at home, that is, an artificial member.Such toys are preferable to ladies and if the girl wants it, she can remain in free possession.For the production of pasta, they are appropriate:
Gypsum mixture
For sale freely in a manufacturing supermarket, pharmacy or children's toys.Having prepared the mass (the rules for gypsum work are described in the instructions incorporated in the package), a member of the desired size is sheated, it is allowed to dry completely.After being treated with sandpaper to eliminate all bumps.Before love games, a condom is placed in the phallus.
The use of a plastic gypsum mixture is also possible for the production of nozzles: therefore, a member who was fully and wrapped in a strip is covered with gypsum mixture and let it harden.However, such a game will be very rigid, and this property causes discomfort, pain, suffering.Its second disadvantage is fragility.
Silicone mixture
Another option for filling is in form from the previous vibrator.That is, if the game has already been purchased (or the packaging by it accidentally got from friends), the silicone mass can be spilled into a plastic shape, previously lubricated with vegetable oil for free extraction at the end of the work and after stabbing, glue half.
The glue is capable of causing the stronger allergy so that games with such an artificial member are only recommended by the rubber product No. 2.
Cerium
This material is available in 90% of cases and everywhere, and has advantages:
- It easily takes the desired shape.
- It has a characteristic aroma.
- In the absence of allergies to natural beekeeping, it is allowed to introduce a woman into the body without a condom (as long as we treat it with grease).
The wax wax is heated, given to the necessary dimensions of the length and width, if desired, additional stimulation, spikes, ribs, etc.
Plasticine
This product for children's creativity can be used in the same way as wax, but it is worth considering that it is more plastic and can therefore easily lose its shape in the middle of sexual intercourse.A simple pencil is able to make a more stable game, placed in a blurry artificial member or preliminary freezing of the phallus.
Improvised means
You can make a nozzle for a penis on your own, but this process is not fast.If the desire for the experiments suddenly emerged and there are no special games on the hand, you can use improvisation.How can you replace a member?
- Vegetables and fruits.In almost every refrigerator, there are gifts of nature that have the shape of a phallic symbol.An ideal and affordable choice - cucumbers and bananas, which in a frozen form will bring their heat into familiar toys.
- Mobile phones.We are talking about small models that can be put in vibration.
- Electric razor.A cutting block has previously been removed from it.
The alternative will serve as a comb with long and wide pen, caramel curls and other things of a phallic shape without sharp corners and protrusions.The main condition for their application: Rinse in water and place a condom on them.
Bed games with nozzles, artificial members and lubricants are invited to make diversity and acidity in the couple's daily close life.However, before replacing a member with an artificial copy, it is worth coordinating this issue with a lover, otherwise a romantic night may end up unfortunately: a serious controversy or a painful break.